This product is not available in region
overview
Range consist of 105 customizable models.
According to the cold room temperatures the range is divided as follows:
- CGC G4 E4 F4 A4 for higher temperatures (≥ +2 °C) with 4 mm fin spacing;
- CGC G6 E6 F6 A6 or medium temperatures (≥ –15 °C) with 6 mm fin spacing, electric defrost version (ED) is recommended;
- CGC G8 E8 F8 A8 for low temperatures (≥ –35 °C) with 8 mm fin spacing, equipped with electric defrost (ED).
On request the models can be equipped with non-standard: coils, defrosting and fan motors.
Range consist of 105 customizable models.
According to the cold room temperatures the range is divided as follows:
- CGC G4 E4 F4 A4 for higher temperatures (≥ +2 °C) with 4 mm fin spacing;
- CGC G6 E6 F6 A6 or medium temperatures (≥ –15 °C) with 6 mm fin spacing, electric defrost version (ED) is recommended;
- CGC G8 E8 F8 A8 for low temperatures (≥ –35 °C) with 8 mm fin spacing, equipped with electric defrost (ED).
On request the models can be equipped with non-standard: coils, defrosting and fan motors.
applications
- Small cold rooms
- Commercial refrigeration cold rooms
- Small cold rooms
- Commercial refrigeration cold rooms
capacity range
From 1 to 27,2 kW
From 1 to 27,2 kW
Technical Information
Coil features
- This range is equipped with highly efficient coils made from aluminum fins and special copper tubes.
- Design pressure: up to 80 bar.
- This range is equipped with highly efficient coils made from aluminum fins and special copper tubes.
- Design pressure: up to 80 bar.
Casing
- Made of a magnesium aluminum alloy, with a smooth finish covered by a plastic protection film.
Fan motors
The standard AC fan motors employed have the following features:
Ø 250 mm
- fan motor module: from 1 to 4
- shaded pole single-phase 230V/1/50-60Hz
- fiberglass charged polyamide fan guards
Ø 315 mm
- fan motor module: from 2 to 4
- external rotor single-phase 230V/1/50-60Hz
- built-in electric capacitor
- epoxy coated steel fan guard
Ø 350 mm
- fan motor module: from 1 to 5
- external rotor single-phase 230V/1/50-60Hz
- built-in electric capacitor
- epoxy coated steel fan guard
The optional high efficiency EC fan motors have the following features:
Ø 250 mm
- fan motor module: from 1 to 4
- 230V/1/50-60Hz
- fiberglass charged polyamide fan guards
Ø 315 mm
- fan motor module: from 2 to 4
- external rotor single-phase 230V/1/50-60Hz
- epoxy coated steel fan guard
Ø 350 mm
- fan motor module: from 1 to 5
- external rotor single-phase 230V/1/50-60Hz
- epoxy coated steel fan guard
The standard AC fan motors employed have the following features:
Ø 250 mm
- fan motor module: from 1 to 4
- shaded pole single-phase 230V/1/50-60Hz
- fiberglass charged polyamide fan guards
Ø 315 mm
- fan motor module: from 2 to 4
- external rotor single-phase 230V/1/50-60Hz
- built-in electric capacitor
- epoxy coated steel fan guard
Ø 350 mm
- fan motor module: from 1 to 5
- external rotor single-phase 230V/1/50-60Hz
- built-in electric capacitor
- epoxy coated steel fan guard
The optional high efficiency EC fan motors have the following features:
Ø 250 mm
- fan motor module: from 1 to 4
- 230V/1/50-60Hz
- fiberglass charged polyamide fan guards
Ø 315 mm
- fan motor module: from 2 to 4
- external rotor single-phase 230V/1/50-60Hz
- epoxy coated steel fan guard
Ø 350 mm
- fan motor module: from 1 to 5
- external rotor single-phase 230V/1/50-60Hz
- epoxy coated steel fan guard
Defrost
Wiring
- The electric parts and casing are connected to an earth terminal.
- The wiring of motors and heaters is carried out in separate IP 54 protection grade junction boxes.
Certifications
- CE
- PED
Published data
- Nominal capacity assessed in practical operating ambient, i.e. in wet conditions, in direct expansion application.
- CGC Fin spacing code 4: CO2 refrigerant; air inlet temperature 4 °C; evaporating temperature –4 °C; TD 8 K.
- CGC Fin spacing code 6: CO2 refrigerant; air inlet temperature 0 °C; evaporating temperature –8 °C; TD 8 K.
- CGC Fin spacing code 8: CO2 refrigerant; air inlet temperature –25 °C; evaporating temperature –33 °C; TD 8 K.
- Nominal capacity assessed in practical operating ambient, i.e. in wet conditions, in direct expansion application.
- CGC Fin spacing code 4: CO2 refrigerant; air inlet temperature 4 °C; evaporating temperature –4 °C; TD 8 K.
- CGC Fin spacing code 6: CO2 refrigerant; air inlet temperature 0 °C; evaporating temperature –8 °C; TD 8 K.
- CGC Fin spacing code 8: CO2 refrigerant; air inlet temperature –25 °C; evaporating temperature –33 °C; TD 8 K.
Downloads
Scelte Selection Software
SCELTE is a web based application to select all ECO™ branded coolers and to configure bespoke models.
The selection engine is faster than ever and will allow you to select the unit that suit your requirements, also thanks to a comprehensive database with all new generation refrigerants available on the market.
