Applications
- Commercial AC
- Refrigeration systems
- Close control
- Precision air conditioning
- Data centers
Capacity Range
EMEA For Dry Coolers Only: Please use Scelte selection software
APAC Please contact us
KCE Specifications
Overview
The KCE range has been specifically developed to satisfy a wide variety of applications in air conditioning and commercial/industrial refrigeration sectors.
On request, the models can be equipped with non-standard coils and fan motors.
Coil Features
EMEA
The entire range is equipped with highly efficient coils made from special profile aluminium fins and smooth copper tube, fin spacing is 2,1 mm for the entire range.
APAC
The entire range is equipped with highly efficient coils made from special “Air intake” profile aluminium fins and inner grooved copper tube (smooth tubes for CO2 Gas Coolers and Dry Coolers), fin spacing is 2,1 mm for the entire range.
The entire range is equipped with highly efficient coils made from special profile aluminium fins and smooth copper tube, fin spacing is 2,1 mm for the entire range.
APAC
The entire range is equipped with highly efficient coils made from special “Air intake” profile aluminium fins and inner grooved copper tube (smooth tubes for CO2 Gas Coolers and Dry Coolers), fin spacing is 2,1 mm for the entire range.
Casing
Casing Features
Made of a pre-painted galvanised metal sheet, with a smooth finish covered by a plastic protection film
The particular structure of the side panels and the legs/support brackets, ensures improved sturdiness and stability, but also provides stable support for the coil and reduces shaking during operation with vertical airflow
Fan Motors
The axial fan motors employed on the entire range are the most technologically up-to-date on the market. New solutions like the hybrid shaped blades or bionic technology are widely used. These fan motors have a wide range of diameters and rotation speeds
The standard AC fan motors employed have the following features:
The optional high efficiency EC fan motors have the following features:
- Ø 500 mm: (poles) 4, 6, 8, 12
- fan motor module: from 1 to 8
- Ø 630 mm: (poles) 4, 6, 8, 12
- fan motor module: from 1 to 8
- EMEA Ø 710 mm: (poles) 4, 6
- fan motor module: from 1 to 4
- EMEA Ø 800 mm: (poles) 6, 8 strengthened, 8; 12 1), 12 slowed 2), 12 ultra-slowed
- fan motor module: from 1 to 14 (for dry coolers and CO2 gas coolers please contact us)
- APAC Ø 800 mm: (poles) 6, 8; 12 1), 12 slowed
- fan motor module: from 1 to 14 (for dry coolers and CO2 gas coolers please contact us)
- Ø 910 mm: (poles) 6 strengthened, 6, 8, 12
- fan motor module: from 1 to 4 (for dry coolers and CO2 gas coolers please contact us)
- Ø 1000 mm: (poles) 6, 12, 12 slowed
- fan motor module: from 1 to 4 (for dry coolers and CO2 gas coolers please contact us)
- three-phase 400V/3/50Hz
- dual speed (Delta/Star)
- die-cast aluminum or hybrid aluminum/technopolymer fan blades, with optimized sickle shaped profile
The optional high efficiency EC fan motors have the following features:
- EMEA Ø 500, 630, 710, 800, 910 or 1000 mm
- fan motor module: the same as AC fan motors
- speed control with 0-10V signal
- additional speed regulator with MODBUS system
- operating temperature: –25 ÷ +60 °C
- APAC Ø 500, 630, 800, 910 or 1000 mm
- fan motor module: the same as AC fan motors
- speed control with 0-10V signal
- additional speed regulator with MODBUS system
- operating temperature: –25 ÷ +60 °C
Wiring
The fan motors and the casework are predisposed for grounding
Certifications
- CE
- PED
