EGK

egk

Applications

  • Commercial AC
  • Refrigeration systems
  • Close control
  • Precision air conditioning
  • Data centers

Capacity Range

  • Air cooled condensers: from 9,7 to 1516 kW

EGK Specifications

Overview

The EG project was created with the intent of incorporating the latest international directives that aim to mitigate climate change due to global warming. Thanks to this technological platform, we are able to offer comprehensive ranges of dry coolers, gas coolers and condensers, the latter can operate with all the refrigerants currently available on the market and with futures ones

Range consist of 6651 customizable models

The EG platform is future-ready for possible energy directive evolutions, thanks to its innovative modular construction and adaptable design

The EGK condensers are designed according to the directive EU directive No. 517/2014 (F-GAS) regulating fluorinated gases, calling for the reduction of HFC refrigerants, and the requirements of the ErP 2015 directive

On request the models can be equipped with non-standard coils and fan motors

Coil Features
The EGK condenser range is equipped with high-efficiency heat exchangers with geometries that guarantee an average reduction of the internal volumes of 40% compared to the past The heat exchangers are made from special profile “AIR INTAKE” aluminum fins and reduced diameter inner grooved copper tubes. They are suitable for low GWP (Global Warming Potential) transitional refrigerants and are supplied charged with dry air at 2 bar The fin spacing for the entire range is 2,1 mm The EGK condenser range is divided into three main low refrigerant content coil configurations:
  • LOW CHARGE
  • Two rows of fan motors
    • Ø 500, Ø 630, Ø 710 mm.
    • From 2 to 10 fan motors.
  • Single and two rows of fan motors
    • Ø 800, Ø 910, Ø 1000 mm.
    • From 1 to 16 fan motors.
    • Capacities from 18,5 kW to 1516 kW according to EN 327.

  • EXTRA LOW CHARGE
  • Single row of fan motors
    • Ø 500, Ø 630, Ø 710 mm.
    • From 1 to 5 fan motors.
    • Capacities from 9,7 kW to 285 kW according to EN 327.

  • ULTRA LOW CHARGE (as option)
  • Single row of fan motors
    • Ø 500, Ø 630 mm.
    • From 1 to 2 fan motors
    • modules “A” e “B”.
    • Capacities from 9,7 kW to 100 kW according to EN 327.
Casing
Casing Features Made of a pre-painted galvanised metal sheet, with a smooth finish covered by a plastic protection film
Fan Motors
This range can be equipped with the most suitable types of fan motors available on the market, from the traditional AC external rotor type to the electronically commutated EC fan motors, together with the latest generation of diffusers and combined aeraulic systems
  • Ø 500 mm: (poles) 4, 6, 8, 12
    • fan motor module: from 1 to 10
  • Ø 630 mm: (poles) 4, 6, 8, 12
    • fan motor module: from 1 to 10
  • Ø 710 mm: (poles) 4, 6
    • fan motor module: from 1 to 10
  • Ø 800 mm: (poles) 6, 8 strengthened, 8; 12 1), 12 slowed 2), 12 ultra-slowed
    • fan motor module: from 1 to 16
  • Ø 910 mm: (poles) 6 strengthened, 6, 8, 12
    • fan motor module: from 1 to 16
  • Ø 1000 mm: (poles) 6, 12, 12 slowed
    • fan motor module: from 1 to 16
  • three-phase 400V/3/50Hz
  • dual speed (Delta/Star)
  • die-cast aluminum or hybrid aluminum/technopolymer fan blades, with optimized sickle shaped profile
  • epoxy coated steel fan guards
For selection of EC fan motors please contact us
Wiring
The fan motors and the casework are predisposed for grounding
Certifications
  • CE
  • PED
  • EAC
Published Data
  • Air cooled condensers
  • EN 327 reference standard
  • The stated capacity is assessed based on ambient temperature 25 °C and condensing temperature 40 °C with R448A (mid-point)

Contact Modine For More Information