This product is not available in region
overview
Range consist of 69 customizable models.
According to the room temperature the range is divided as follows:
- CTE E4 - A4 for higher temperatures (≥ +2 °C) with 4 mm fin spacing;
- CTE M6 - E6 - A6 for medium temperatures (≥ –15 °C) with 6 mm fin spacing, electric defrost version (ED) is recommended;
- CTE L8 - E8 - A8 for low temperatures (≥ –35 °C) with 8,5mm fin spacing, equipped with electric defrost (ED).
On request the models can be equipped with non-standard coils, defrosting and fan motors.
Range consist of 69 customizable models.
According to the room temperature the range is divided as follows:
- CTE E4 - A4 for higher temperatures (≥ +2 °C) with 4 mm fin spacing;
- CTE M6 - E6 - A6 for medium temperatures (≥ –15 °C) with 6 mm fin spacing, electric defrost version (ED) is recommended;
- CTE L8 - E8 - A8 for low temperatures (≥ –35 °C) with 8,5mm fin spacing, equipped with electric defrost (ED).
On request the models can be equipped with non-standard coils, defrosting and fan motors.
Range consist of 69 customizable models.
According to the room temperature the range is divided as follows:
- CTE E4 - A4 for higher temperatures (≥ +2 °C) with 4 mm fin spacing;
- CTE M6 - E6 - A6 for medium temperatures (≥ –15 °C) with 6 mm fin spacing, electric defrost version (ED) is recommended;
- CTE L8 - E8 - A8 for low temperatures (≥ –35 °C) with 8,5mm fin spacing, equipped with electric defrost (ED).
On request the models can be equipped with non-standard coils, defrosting and fan motors.
applications
- Large refrigeration cold rooms
- Refrigerated warehouses
- Large refrigeration cold rooms
- Refrigerated warehouses
- Large refrigeration cold rooms
- Refrigerated warehouses
capacity range
From 7,8 to 126 kW
From 7,8 to 117 kW
From 8,2 to 126 kW
Technical Information
Coil features
- The entire range is equipped with high efficiency coils made from special profile aluminium fins and inner- grooved copper tube, suitable for new generation refrigerants.
- The entire range is equipped with high efficiency coils made from special profile aluminium fins and inner- grooved copper tube, suitable for new generation refrigerants.
- The entire range is equipped with high efficiency coils made from special profile aluminium fins and inner- grooved copper tube, suitable for new generation refrigerants.
Casing
- Made of a magnesium aluminum alloy, with a smooth finish covered by a plastic protection film.
Fan motors
The standard AC fan motors employed have the following features:
Ø 500 mm
- fan motor module: from 1 to 4
- external rotor
- three-phase 400V/3/50 Hz
- epoxy coated steel fan guard
Ø 630 mm
- fan motor module: from 1 to 4
- external rotor
- three-phase 400V/3/50-60 Hz
- epoxy coated steel fan guard
The optional high efficiency EC fan motors have the following features:
Ø 500 mm
- fan motor module: from 1 to 4
- external rotor
- three-phase 400V/3/50 Hz
- epoxy coated steel fan guard
Ø 630 mm
- fan motor module: from 1 to 4
- external rotor
- three-phase 400V/3/50 Hz
- epoxy coated steel fan guard
The standard AC fan motors employed have the following features:
Ø 500 mm
- fan motor module: from 1 to 4
- external rotor
- three-phase 400V/3/50 Hz
- epoxy coated steel fan guard
Ø 630 mm
- fan motor module: from 1 to 4
- external rotor
- three-phase 400V/3/50-60 Hz
- epoxy coated steel fan guard
The optional high efficiency EC fan motors have the following features:
Ø 500 mm
- fan motor module: from 1 to 4
- external rotor
- three-phase 400V/3/50 Hz
- epoxy coated steel fan guard
Ø 630 mm
- fan motor module: from 1 to 4
- external rotor
- three-phase 400V/3/50 Hz
- epoxy coated steel fan guard
The standard AC fan motors employed have the following features:
Ø 500 mm
- fan motor module: from 1 to 4
- external rotor
- three-phase 400V/3/50 Hz
- epoxy coated steel fan guard
Ø 630 mm
- fan motor module: from 1 to 4
- external rotor
- three-phase 400V/3/50-60 Hz
- epoxy coated steel fan guard
The optional high efficiency EC fan motors have the following features:
Ø 500 mm
- fan motor module: from 1 to 4
- external rotor
- three-phase 400V/3/50 Hz
- epoxy coated steel fan guard
Ø 630 mm
- fan motor module: from 1 to 4
- external rotor
- three-phase 400V/3/50 Hz
- epoxy coated steel fan guard
Defrost
Wiring
- The electric parts and casework are connected to a ground terminal.
- The wiring of the heaters is carried out in IP 54 protection grade junction box.
Certifications
- CE
- PED
- TÜV SÜD (Please see cerfified model list on the catalogue)
Published data
- EN 328 reference standard.
- Nominal capacity assessed in practical operating ambient i.e. in wet conditions.
- EMEA: R448A refrigerant (mid point).
- APAC: R404A refrigerant.
- air inlet temperature 0 °C.
- evaporating temperature –8 °C.
- TD 8 K.
- EN 328 reference standard.
- Nominal capacity assessed in practical operating ambient i.e. in wet conditions.
- R448A refrigerant (mid point).
- air inlet temperature 0 °C.
- evaporating temperature –8 °C.
- TD 8 K.
- EN 328 reference standard.
- Nominal capacity assessed in practical operating ambient i.e. in wet conditions.
- R404A refrigerant.
- air inlet temperature 0 °C.
- evaporating temperature –8 °C.
- TD 8 K.
Downloads
Scelte Selection Software
SCELTE is a web based application to select all ECO™ branded coolers and to configure bespoke models.
The selection engine is faster than ever and will allow you to select the unit that suit your requirements, also thanks to a comprehensive database with all new generation refrigerants available on the market.
