This product is not available in region
overview
AGS is our slanted unit cooler range for A2L refrigerant systems.
This range is specifically designed for limited height cold rooms and thanks to its distinctive profile storage space can be maximized.
This range consists of 20 customizable models.
In accordance to the room temperature the range is subdivided into two types:
- AGS H3 for higher temperatures (≥ +2 °C), with 3,5/7 mm dual fin spacing and electric defrost;
- AGS H4 for higher temperatures (≥ +2 °C), with 4 mm fin spacing;
- AGS L4 for lower temperatures (≥ –25 °C), with 4,5/9 mm dual fin spacing and electric defrost;
- AGS L7 for lower temperatures (≥ –25 °C), with 7 mm fin spacing and electric defrost.
On request the models can be equipped with non-standard: coils, defrosting and fan motors.
AGS is our slanted unit cooler range for A2L refrigerant systems.
This range is specifically designed for limited height cold rooms and thanks to its distinctive profile storage space can be maximized.
This range consists of 20 customizable models.
In accordance to the room temperature the range is subdivided into two types:
- AGS H3 for higher temperatures (≥ +2 °C), with 3,5/7 mm dual fin spacing and electric defrost;
- AGS H4 for higher temperatures (≥ +2 °C), with 4 mm fin spacing;
- AGS L4 for lower temperatures (≥ –25 °C), with 4,5/9 mm dual fin spacing and electric defrost;
- AGS L7 for lower temperatures (≥ –25 °C), with 7 mm fin spacing and electric defrost.
On request the models can be equipped with non-standard: coils, defrosting and fan motors.
applications
- Reach-in cabinets
- Display cases
- Small cold rooms
- Walk-in cabinets
- low ceiling commercial refrigeration cold rooms
- Reach-in cabinets
- Display cases
- Small cold rooms
- Walk-in cabinets
- low ceiling commercial refrigeration cold rooms
capacity range
from 0,3 to 7,6 kW
Accepted A2L refrigerants:
- R455A
- R454C
- R1234yf
- R1234ze
from 0,3 to 7,6 kW
Accepted A2L refrigerants:
- R455A
- R454C
- R1234yf
- R1234ze
Technical Information
Coil features
- The entire range is equipped with high efficiency coils suitable for A2L refrigerants made from special profile aluminium fins and inner grooved copper tube.
- Thanks to a new geometry there is a substantial reduction of the inner volume resulting in a decreased refrigerant use.
- The updated coil design responds to the recent guidelines governing the reduction of HFC gases with high greenhouse effect.
- The entire range is equipped with high efficiency coils suitable for A2L refrigerants made from special profile aluminium fins and inner grooved copper tube.
- Thanks to a new geometry there is a substantial reduction of the inner volume resulting in a decreased refrigerant use.
- The updated coil design responds to the recent guidelines governing the reduction of HFC gases with high greenhouse effect.
Casing
- Made of a magnesium aluminum alloy, with a smooth finish covered by a plastic protection film.
Fan motors
The standard AC fan motors employed have the following features:
Ø 200 mm
- single-phase 230V/1/50-60Hz
- and fibreglass charged polyamide fan guard
- IP 42 protection grade
- class B insulation
- internal thermal contact protection
- fibreglass charged polyamide fan guard
Ø 250 mm
- shaded pole single-phase 230V/1/50-60Hz
- IP 44 protection grade
- class B insulation
- internal thermal contact protection
- quick cable connection
- fibreglass charged polyamide fan guard
Ø 315 mm
- external rotor single phase 230V/1/50-60Hz
- built-in electric capacitor
- IP 44 protection grade
- class B insulation
- internal thermal contact protection
- epoxy coated steel fan guard
The optional high efficiency EC fan motors have the following features:
Ø 200 mm
- IP 65 protection grade
- class B insulation
- built-in electronic protection
Ø 250 mm
- IP 54 protection grade
- class H insulation
- built-in electronic protection
- standard wires
Ø 300 mm
- class B insulation
- built-in electronic protection
The standard AC fan motors employed have the following features:
Ø 200 mm
- single-phase 230V/1/50-60Hz
- and fibreglass charged polyamide fan guard
- IP 42 protection grade
- class B insulation
- internal thermal contact protection
- fibreglass charged polyamide fan guard
Ø 250 mm
- shaded pole single-phase 230V/1/50-60Hz
- IP 44 protection grade
- class B insulation
- internal thermal contact protection
- quick cable connection
- fibreglass charged polyamide fan guard
Ø 315 mm
- external rotor single phase 230V/1/50-60Hz
- built-in electric capacitor
- IP 44 protection grade
- class B insulation
- internal thermal contact protection
- epoxy coated steel fan guard
The optional high efficiency EC fan motors have the following features:
Ø 200 mm
- IP 65 protection grade
- class B insulation
- built-in electronic protection
Ø 250 mm
- IP 54 protection grade
- class H insulation
- built-in electronic protection
- standard wires
Ø 300 mm
- class B insulation
- built-in electronic protection
Defrost
Wiring
- The electric parts and casework are connected to a grounding terminal.
- The wiring of motors and heaters is carried out in separate IP 54 protection grade junction boxes.
Certifications
- CE
- PED
Published data
- EN 328 reference standard.
- Nominal capacity assessed in practical operating ambient i.e. in wet conditions.
- R1234yf and R454C refrigerants.
- air inlet temperature 0 °C.
- evaporating temperature –8 °C.
- TD 8 K.
- EN 328 reference standard.
- Nominal capacity assessed in practical operating ambient i.e. in wet conditions.
- R1234yf and R454C refrigerants.
- air inlet temperature 0 °C.
- evaporating temperature –8 °C.
- TD 8 K.
Downloads
Scelte Selection Software
SCELTE is a web based application to select all ECO™ branded coolers and to configure bespoke models.
The selection engine is faster than ever and will allow you to select the unit that suit your requirements, also thanks to a comprehensive database with all new generation refrigerants available on the market.
