CDD

IDE-CDD_54

Applications

  • Reach-in cabinets
  • Small cold rooms
  • Walk-in cabinets
  • Low ceiling commercial refrigeration cold rooms
  • Food processing rooms (fresh and sensitive products, sea food, meat)

Capacity Range

From 0,82 to 80,2 kW

CDD Specifications

Overview

Range consists of 52 customizable models.

According to the room temperature, the range is divided as follows:

  • CDD 04 – for higher temperatures (≥ +2 °C), with 4 mm fin spacing
  • CDD 49-07 – for medium temperatures (≥ –15 °C), 4,5 / 9 mm staggered fin spacing or 7 mm fin spacing (ED – electric defrost version is recommended)
  • CDD 10 – for lower temperatures (≥ –35 °C), with 10mm fin spacing (ED – electric defrost version is recommended)

On request, the models can be equipped with non-standard: coils, defrosting, and fan motors.

Coil Features
  • The CDD range is equipped with highly efficient coils made from aluminum fins and special copper tubes
  • The maximum allowed operational pressure is 80 bar for Ø 230 mm models and 60 bar for all the others
Casing
Casing Features Made of a magnesium aluminum alloy, with a smooth finish covered by a plastic protection film
Fan Motors
The standard AC fan motors employed have the following features:
  • Ø 230 mm
  • fan motor module: from 1 to 5
  • single-phase 230V/1/50-60Hz
  • fibreglass charged polyamide fan guard
  • Ø 450 mm
  • fan motor module: from 1 to 3
  • external rotor
  • three-phase 400V/3/50 Hz
  • dual speed
  • epoxy coated steel fan guard
  • Ø 560 mm
  • external rotor
  • three-phase 400V/3/50 Hz
  • dual speed
  • epoxy coated steel fan guard
The optional high efficiency EC fan motors have the following features:
  • Ø 230 mm
  • fan motor module: the same as AC fan motors
  • single-phase 230V/1/50-60Hz
  • fibreglass charged polyamide fan guard
  • Ø 450 mm
  • fan motor module: the same as AC fan motors
  • external rotor
  • three-phase 400V/3/50 Hz
  • epoxy coated steel fan guard
  • Ø 560 mm
  • fan motor module: the same as AC fan motors
  • external rotor
  • three-phase 400V/3/50 Hz
  • epoxy coated steel fan guard
Defrost
The versions with standard electric defrost (ED) are equipped with stainless steel heaters with vulcanised terminals preset for 230V/1/50-60Hz connection
Wiring
The electric parts and casework are connected to a ground terminal, the wiring of the heaters is carried out in IP 54 protection grade junction boxes. In the Ø 230 mm models, fan motors are connected in a separate IP 54 protection grade junction box
Certifications
  • CE
  • PED
Published Data
Nominal capacity assessed in practical operating ambient, i.e. in wet conditions, in direct expansion application
  • CDD 04: CO2 refrigerant; air inlet temperature 4 °C; evaporating temperature –4 °C; TD 8 K
  • CDD 07-10: CO2 refrigerant; air inlet temperature –18 °C; evaporating temperature –25 °C; TD 7 K

Contact Modine For More Information