This product is not available in region
overview
The GME range is designed for applications in cold rooms with limited height for preserving fresh or frozen products.
According to the room temperature, the range is divided follows:
- GME H4 for higher temperatures (≥ +2 °C) with 4 mm fin spacing;
- GME L7 for lower temperatures (≥ –25 °C) with 7 mm fin spacing and ED electric defrost.
On request, the models may be equipped with non-standard coils, enhanced defrosting, and fan motors.
The GME range is designed for applications in cold rooms with limited height for preserving fresh or frozen products.
According to the room temperature, the range is divided follows:
- GME H4 for higher temperatures (≥ +2 °C) with 4 mm fin spacing;
- GME L7 for lower temperatures (≥ –25 °C) with 7 mm fin spacing and ED electric defrost.
On request, the models may be equipped with non-standard coils, enhanced defrosting, and fan motors.
applications
- Small cold rooms
- Walk-in cabinets
- Low ceiling commercial refrigeration cold rooms
- Small cold rooms
- Walk-in cabinets
- Low ceiling commercial refrigeration cold rooms
capacity range
From 0,64 to 3,68 kW
From 0,64 to 3,68 kW
Technical Information
Coil features
- The entire range is equipped with highly efficient coils made from special profile aluminium fins and inner grooved copper tube, suitable for new generation refrigerants.
- The entire range is equipped with highly efficient coils made from special profile aluminium fins and inner grooved copper tube, suitable for new generation refrigerants.
Casing
- Made of a magnesium aluminum alloy, with a smooth finish covered by a plastic protection film.
Fan motors
The standard AC fan motors employed have the following features:
Ø 250 mm
- fan motor module: from 1 to 4
- shaded pole
- single-phase 230V/1/50-60 Hz
- fibreglass charged polyamide fan guard
The optional high efficiency EC fan motors have the following features:
Ø 250 mm
- fan motor module: from 1 to 4
- single-phase 230V/1/50-60Hz
- fibre- glass charged polyamide fan guards
The standard AC fan motors employed have the following features:
Ø 250 mm
- fan motor module: from 1 to 4
- shaded pole
- single-phase 230V/1/50-60 Hz
- fibreglass charged polyamide fan guard
The optional high efficiency EC fan motors have the following features:
Ø 250 mm
- fan motor module: from 1 to 4
- single-phase 230V/1/50-60Hz
- fibre- glass charged polyamide fan guards
Defrost
Wiring
- The electric parts and casework are connected to a grounding terminal.
- The wiring of the motors and heaters is carried out in separate IP 54 protection grade junction boxes.
Certifications
- CE
- PED
- TÜV SÜD (Please see cerfified model list on the catalogue)
Published data
- EN 328 reference standard.
- Nominal capacity assessed in practical operating ambient i.e. in wet conditions.
- R448A refrigerant (media glide).
- Air inlet temperature 0 °C.
- Evaporating temperature –8 °C.
- TD 8 K.
- EN 328 reference standard.
- Nominal capacity assessed in practical operating ambient i.e. in wet conditions.
- R448A refrigerant (media glide).
- Air inlet temperature 0 °C.
- Evaporating temperature –8 °C.
- TD 8 K.
Downloads
Scelte Selection Software
SCELTE is a web based application to select all ECO™ branded coolers and to configure bespoke models.
The selection engine is faster than ever and will allow you to select the unit that suit your requirements, also thanks to a comprehensive database with all new generation refrigerants available on the market.
