This product is not available in region
overview
Range consists of 5 customizable models.
On request, the models can be equipped with non-standard coils, defrosting, and fan motors.
Range consists of 5 customizable models.
On request, the models can be equipped with non-standard coils, defrosting, and fan motors.
applications
- Food processing rooms (fresh and sensitive products, sea food, meat).
- Food processing rooms (fresh and sensitive products, sea food, meat).
capacity range
From 3,4 to 8,8 kW
From 3,4 to 8,8 kW
Technical Information
Coil features
- The models of the entire range are equipped high efficiency coils made from aluminum fins and special copper tube, with 5 mm fin spacing: suitable for high/medium room temperatures (≥ –5°C).
- Design pressure: up to 80 bar.
- The models of the entire range are equipped high efficiency coils made from aluminum fins and special copper tube, with 5 mm fin spacing: suitable for high/medium room temperatures (≥ –5°C).
- Design pressure: up to 80 bar.
Casing
- Casing Features Made of a magnesium aluminum alloy, with a smooth finish covered by a plastic protection film.
Fan motors
The standard AC fan motors employed have the following features:
Ø 250 mm
- shaded pole
- single-phase 230V/1/50-60Hz
Ø 315 mm
- external rotor
- single-phase 230V/1/50-60Hz
- built-in electric capacitor
- epoxy coated steel fan guard
The optional high efficiency EC fan motors have the following features:
Ø 250 mm
- single-phase 230V/1/50-60Hz
- fibreglass charged polyamide fan guard
Ø 300 mm
- external rotor single-phase 230V/1/50-60Hz
- epoxy coated steel fan guard
The standard AC fan motors employed have the following features:
Ø 250 mm
- shaded pole
- single-phase 230V/1/50-60Hz
Ø 315 mm
- external rotor
- single-phase 230V/1/50-60Hz
- built-in electric capacitor
- epoxy coated steel fan guard
The optional high efficiency EC fan motors have the following features:
Ø 250 mm
- single-phase 230V/1/50-60Hz
- fibreglass charged polyamide fan guard
Ø 300 mm
- external rotor single-phase 230V/1/50-60Hz
- epoxy coated steel fan guard
Defrost
Wiring
- The electric parts and casework are connected to a grounding terminal, the wiring of the motors and heaters is carried out in separate IP 54 protection grade junction boxes.
Certifications
- CE
- PED
Published data
- Nominal capacity assessed in practical operating ambient, i.e. in wet conditions, in direct expansion application.
- CO2 refrigerant; air inlet temperature 4 °C; evaporating temperature –4 °C; TD 8 K.
- Nominal capacity assessed in practical operating ambient, i.e. in wet conditions, in direct expansion application.
- CO2 refrigerant; air inlet temperature 4 °C; evaporating temperature –4 °C; TD 8 K.
Downloads
Scelte Selection Software
SCELTE is a web based application to select all ECO™ branded coolers and to configure bespoke models.
The selection engine is faster than ever and will allow you to select the unit that suit your requirements, also thanks to a comprehensive database with all new generation refrigerants available on the market.
