This product is not available in region
overview
Range consists of 105 customizable models.
According to the cold room temperatures, the range is divided as follows:
- CGC G4 E4 F4 A4 for higher temperatures (≥ +2 °C) with 4 mm fin spacing;
- CGC G6 E6 F6 A6 or medium temperatures (≥ –15 °C) with 6 mm fin spacing, electric defrost version (ED) is recommended;
- CGC G8 E8 F8 A8 for low temperatures (≥ –35 °C) with 8 mm fin spacing, equipped with electric defrost (ED).
On request, the models can be equipped with non-standard: coils, defrosting, and fan motors.
Range consists of 105 customizable models.
According to the cold room temperatures, the range is divided as follows:
- CGC G4 E4 F4 A4 for higher temperatures (≥ +2 °C) with 4 mm fin spacing;
- CGC G6 E6 F6 A6 or medium temperatures (≥ –15 °C) with 6 mm fin spacing, electric defrost version (ED) is recommended;
- CGC G8 E8 F8 A8 for low temperatures (≥ –35 °C) with 8 mm fin spacing, equipped with electric defrost (ED).
On request, the models can be equipped with non-standard: coils, defrosting, and fan motors.
applications
- Commercial refrigeration cold rooms
- Low ceiling commercial refrigeration cold rooms
- Food processing rooms (fresh and sensitive products, sea food, meat)
- Commercial refrigeration cold rooms
- Low ceiling commercial refrigeration cold rooms
- Food processing rooms (fresh and sensitive products, sea food, meat)
capacity range
From 1,4 to 34,7 kW
From 1,4 to 34,7 kW
Technical Information
Coil features
- The CGD range is equipped with highly efficient coils made from aluminum fins and special copper tubes
- Design pressure: up to 80 bar.
- The CGD range is equipped with highly efficient coils made from aluminum fins and special copper tubes
- Design pressure: up to 80 bar.
Casing
- Made of a magnesium aluminum alloy, with a smooth finish covered by a plastic protection film.
Fan motors
The standard AC fan motors employed have the following features:
Ø 315 mm
- fan motor module: from 1 to 6
- external rotor
- single phase dual speed 230V/1/50-60 Hz
- dual speed
- built-in electric capacitor
- fibreglass charged polyamide fan guards
Ø 350 mm
- fan motor module: from 1 to 5
- external rotor
- single-phase (4 or 6 poles) 230V/1/50-60Hz
- built-in electric capacitor
- epoxy coated steel fan guard
The optional high efficiency EC fan motors have the following features:
Ø 315 mm
- fan motor module: from 1 to 6
- external rotor
- single phase dual speed 230V/1/50-60 Hz
- fibreglass charged polyamide fan guards
Ø 350 mm
- fan motor module: from 1 to 5
- external rotor
- single phase 230V/1/50-60 Hz
- fibreglass charged polyamide fan guards
- speed regulation with 0-10V signal
The standard AC fan motors employed have the following features:
Ø 315 mm
- fan motor module: from 1 to 6
- external rotor
- single phase dual speed 230V/1/50-60 Hz
- dual speed
- built-in electric capacitor
- fibreglass charged polyamide fan guards
Ø 350 mm
- fan motor module: from 1 to 5
- external rotor
- single-phase (4 or 6 poles) 230V/1/50-60Hz
- built-in electric capacitor
- epoxy coated steel fan guard
The optional high efficiency EC fan motors have the following features:
Ø 315 mm
- fan motor module: from 1 to 6
- external rotor
- single phase dual speed 230V/1/50-60 Hz
- fibreglass charged polyamide fan guards
Ø 350 mm
- fan motor module: from 1 to 5
- external rotor
- single phase 230V/1/50-60 Hz
- fibreglass charged polyamide fan guards
- speed regulation with 0-10V signal
Defrost
Wiring
- The versions with standard electric defrost (ED) are equipped with stainless steel heaters with vulcanised terminals preset for 400V/3/50-60 Hz connection.
- The electric parts and casing are connected to a earth terminal.
- The wiring of the motors and heaters is carried out in separate IP 54 protection grade junction boxes.
Certifications
- CE
- PED
- EAC
Published data
- Nominal capacity assessed in practical operating ambient, i.e. in wet conditions, in direct expansion application.
- CGD 3: CO2 refrigerant; air inlet temperature 10 °C; evaporating temperature 0 °C; TD 10 K.
- CGD 4: CO2 CO2 refrigerant; air inlet temperature 4 °C; evaporating temperature –4 °C; TD 8 K.
- CGD 7: CO2 refrigerant; air inlet temperature –18 °C; evaporating temperature –25 °C; TD 7 K.
- Nominal capacity assessed in practical operating ambient, i.e. in wet conditions, in direct expansion application.
- CGD 3: CO2 refrigerant; air inlet temperature 10 °C; evaporating temperature 0 °C; TD 10 K.
- CGD 4: CO2 CO2 refrigerant; air inlet temperature 4 °C; evaporating temperature –4 °C; TD 8 K.
- CGD 7: CO2 refrigerant; air inlet temperature –18 °C; evaporating temperature –25 °C; TD 7 K.
Downloads
Scelte Selection Software
SCELTE is a web based application to select all ECO™ branded coolers and to configure bespoke models.
The selection engine is faster than ever and will allow you to select the unit that suit your requirements, also thanks to a comprehensive database with all new generation refrigerants available on the market.
