This product is not available in region
overview
The dual discharge GDE range has been specifically designed for cold rooms with limited height for the preservation of fresh or frozen products and in food preparation and handling.
According to the room temperature the range is divided as follows:
- GDE 3 for higher temperatures (≥ 5 °C) with 3 mm fin spacing, designed for work rooms with no possibility of ice/frost formation on fins;
- GDE 4 for medium temperatures (≥ 1 °C) with 4 mm fin spacing;
- GDE 7 for lower temperatures (≥ –25 °C) with 7 mm fin spacing, electric defrost version (ED) is recommended.
On request the models can be equipped with non-standard: coils, defrosting and fan motors.
The dual discharge GDE range has been specifically designed for cold rooms with limited height for the preservation of fresh or frozen products and in food preparation and handling.
Range consists of 48 customizable models.
According to the room temperature the range is divided as follows:
- GDE 3 for higher temperatures (≥ 5 °C) with 3 mm fin spacing, designed for work rooms with no possibility of ice/frost formation on fins;
- GDE 4 for medium temperatures (≥ 1 °C) with 4 mm fin spacing;
- GDE 7 for lower temperatures (≥ –25 °C) with 7 mm fin spacing, electric defrost version (ED) is recommended.
On request the models can be equipped with non-standard: coils, defrosting and fan motors.
The dual discharge GDE range has been specifically designed for cold rooms with limited height for the preservation of fresh or frozen products and in food preparation and handling.
Range consists of 30 customizable models.
According to the room temperature the range is divided as follows:
- GDE 3 for higher temperatures (≥ 5 °C) with 3 mm fin spacing, designed for work rooms with no possibility of ice/frost formation on fins;
- GDE 4 for medium temperatures (≥ 1 °C) with 4 mm fin spacing;
- GDE 7 for lower temperatures (≥ –25 °C) with 7 mm fin spacing, electric defrost version (ED) is recommended.
On request the models can be equipped with non-standard: coils, defrosting and fan motors.
applications
- Commercial refrigeration cold rooms
- Low ceiling commercial refrigeration cold rooms
- Food processing rooms (fresh and sensitive products, sea food, meat)
- Commercial refrigeration cold rooms
- Low ceiling commercial refrigeration cold rooms
- Food processing rooms (fresh and sensitive products, sea food, meat)
- Commercial refrigeration cold rooms
- Low ceiling commercial refrigeration cold rooms
- Food processing rooms (fresh and sensitive products, sea food, meat)
capacity range
Please use Scelte selection software
Please use Scelte selection software
Please contact us
Technical Information
Coil features
- The entire range is equipped with high efficiency coils made from special profile aluminium fins and smooth copper tube, optimized for brine pump circulation.
- The entire range is equipped with high efficiency coils made from special profile aluminium fins and smooth copper tube, optimized for brine pump circulation.
- The entire range is equipped with high efficiency coils made from special profile aluminium fins and smooth copper tube, optimized for brine pump circulation.
Casing
- Made of a magnesium aluminum alloy, with a smooth finish covered by a plastic protection film.
Fan motors
The standard AC fan motors employed have the following features:
Ø 315 mm (EMEA only)
- fan motor module: from 1 to 6
- dual speed
- external rotor
- single phase dual speed 230V/1/50-60 Hz
- built-in electric capacitor
- fibreglass charged polyamide fan guards
Ø 350 mm
- fan motor module: from 1 to 5
- external rotor
- single-phase high speed (4 or 6 poles) 230V/1/50-60Hz
- built-in electric capacitor
- epoxy coated steel fan guard
The optional high efficiency EC fan motors have the following features:
Ø 315 mm (EMEA only)
- fan motor module: from 1 to 6
- external rotor
- single phase dual speed 230V/1/50-60 Hz
- fibreglass charged polyamide fan guards
Ø 350 mm
- fan motor module: from 1 to 5
- external rotor
- single phase 230V/1/50-60 Hz
- fibreglass charged polyamide fan guards
- speed regulation with 0-10V signal
The standard AC fan motors employed have the following features:
Ø 315 mm
- fan motor module: from 1 to 6
- dual speed
- external rotor
- single phase dual speed 230V/1/50-60 Hz
- built-in electric capacitor
- fibreglass charged polyamide fan guards
Ø 350 mm
- fan motor module: from 1 to 5
- external rotor
- single-phase high speed (4 or 6 poles) 230V/1/50-60Hz
- built-in electric capacitor
- epoxy coated steel fan guard
The optional high efficiency EC fan motors have the following features:
Ø 315 mm
- fan motor module: from 1 to 6
- external rotor
- single phase dual speed 230V/1/50-60 Hz
- fibreglass charged polyamide fan guards
Ø 350 mm
- fan motor module: from 1 to 5
- external rotor
- single phase 230V/1/50-60 Hz
- fibreglass charged polyamide fan guards
- speed regulation with 0-10V signal
The standard AC fan motors employed have the following features:
Ø 350 mm
- fan motor module: from 1 to 5
- external rotor
- single-phase high speed (4 or 6 poles) 230V/1/50-60Hz
- built-in electric capacitor
- epoxy coated steel fan guard
The optional high efficiency EC fan motors have the following features:
Ø 350 mm
- fan motor module: from 1 to 5
- external rotor
- single phase 230V/1/50-60 Hz
- fibreglass charged polyamide fan guards
- speed regulation with 0-10V signal
Defrost
Wiring
- The versions with standard electric defrost (ED) are equipped with stainless steel heaters with vulcanised terminals preset for 400V/3/50-60 Hz connection.
- The electric parts and casing are connected to a earth terminal.
- The wiring of the motors and heaters is carried out in separate IP 54 protection grade junction boxes.
Certifications
- CE
- PED
- EAC
- TÜV SÜD (Please see cerfified model list on the catalogue)
Downloads
Scelte Selection Software
SCELTE is a web based application to select all ECO™ branded coolers and to configure bespoke models.
The selection engine is faster than ever and will allow you to select the unit that suit your requirements, also thanks to a comprehensive database with all new generation refrigerants available on the market.
