This product is not available in region
overview
Range consist of 36 customizable models.
In accordance to the room temperature the range is divided as follows:
- IDE-4 for higher temperatures (≥ +2 °C) with 4,5 mm fin spacing;
- IDE-7 for medium temperatures (≥ –25 °C) with 7 mm fin spacing, electric defrost version ED is recommended;
- IDE-10 for lower temperatures (≥ –35 °C) with 10 mm fin spacing, electric defrost version ED is recommended.
On request the models can be equipped with non-standard: coils, defrosting and fan motors.
Range consist of 36 customizable models.
In accordance to the room temperature the range is divided as follows:
- IDE-4 for higher temperatures (≥ +2 °C) with 4,5 mm fin spacing;
- IDE-7 for medium temperatures (≥ –25 °C) with 7 mm fin spacing, electric defrost version ED is recommended;
- IDE-10 for lower temperatures (≥ –35 °C) with 10 mm fin spacing, electric defrost version ED is recommended.
On request the models can be equipped with non-standard: coils, defrosting and fan motors.
Range consist of 36 customizable models.
In accordance to the room temperature the range is divided as follows:
- IDE-4 for higher temperatures (≥ +2 °C) with 4,5 mm fin spacing;
- IDE-7 for medium temperatures (≥ –25 °C) with 7 mm fin spacing, electric defrost version ED is recommended;
- IDE-10 for lower temperatures (≥ –35 °C) with 10 mm fin spacing, electric defrost version ED is recommended.
On request the models can be equipped with non-standard: coils, defrosting and fan motors.
applications
- Low ceiling industrial refrigeration cold rooms
- Refrigerated warehouses
- Low ceiling industrial refrigeration cold rooms
- Refrigerated warehouses
- Low ceiling industrial refrigeration cold rooms
- Refrigerated warehouses
capacity range
Please use Scelte selection software
Please use Scelte selection software
Please contact us
Technical Information
Coil features
- The entire range is equipped with high efficiency coils made from special profile aluminium fins and smooth copper tube, optimized for brine pump circulation.
- The entire range is equipped with high efficiency coils made from special profile aluminium fins and smooth copper tube, optimized for brine pump circulation.
- The entire range is equipped with high efficiency coils made from special profile aluminium fins and smooth copper tube, optimized for brine pump circulation.
Casing
- Made of a magnesium aluminum alloy, with a smooth finish covered by a plastic protection film.
Fan motors
The standard AC fan motors employed have the following features:
Ø 450 mm
- fan motor module: 2 or 3
- external rotor
- three-phase 400V/3/50 Hz
- dual speed
- epoxy coated steel fan guard
Ø 560 mm
- fan motor module: 2 or 4
- external rotor
- three-phase 400V/3/50 Hz
- dual speed
- epoxy coated steel fan guard
The optional high efficiency EC fan motors have the following features:
Ø 450 mm
- fan motor module: 2 or 3
- external rotor
- three-phase 400V/3/50 Hz
- epoxy coated steel fan guard
Ø 560 mm
- fan motor module: 2 or 4
- external rotor
- three-phase 400V/3/50 Hz
- epoxy coated steel fan guard
The standard AC fan motors employed have the following features:
Ø 450 mm
- fan motor module: 2 or 3
- external rotor
- three-phase 400V/3/50 Hz
- dual speed
- epoxy coated steel fan guard
Ø 560 mm
- fan motor module: 2 or 4
- external rotor
- three-phase 400V/3/50 Hz
- dual speed
- epoxy coated steel fan guard
The optional high efficiency EC fan motors have the following features:
Ø 450 mm
- fan motor module: 2 or 3
- external rotor
- three-phase 400V/3/50 Hz
- epoxy coated steel fan guard
Ø 560 mm
- fan motor module: 2 or 4
- external rotor
- three-phase 400V/3/50 Hz
- epoxy coated steel fan guard
The standard AC fan motors employed have the following features:
Ø 450 mm
- fan motor module: 2 or 3
- external rotor
- three-phase 400V/3/50 Hz
- dual speed
- epoxy coated steel fan guard
Ø 560 mm
- fan motor module: 2 or 4
- external rotor
- three-phase 400V/3/50 Hz
- dual speed
- epoxy coated steel fan guard
The optional high efficiency EC fan motors have the following features:
Ø 450 mm
- fan motor module: 2 or 3
- external rotor
- three-phase 400V/3/50 Hz
- epoxy coated steel fan guard
Ø 560 mm
- fan motor module: 2 or 4
- external rotor
- three-phase 400V/3/50 Hz
- epoxy coated steel fan guard
Defrost
Wiring
- The electric parts and casework are predisposed for grounding.
- The wiring of the heaters is carried out in separate IP 54 protection grade junction boxes.
Certifications
- CE
- PED
- TÜV SÜD (Please see cerfified model list on the catalogue)
Downloads
Scelte Selection Software
SCELTE is a web based application to select all ECO™ branded coolers and to configure bespoke models.
The selection engine is faster than ever and will allow you to select the unit that suit your requirements, also thanks to a comprehensive database with all new generation refrigerants available on the market.
