Vshape-K
This product is not available in region
overview
The Vshape range has been specifically developed to satisfy all the possible refrigeration and air conditioning applications.
On request, the models can be equipped with non-standard coils and fan motors.
The Vshape range has been specifically developed to satisfy all the possible refrigeration and air conditioning applications.
On request, the models can be equipped with non-standard coils and fan motors.
The Vshape range has been specifically developed to satisfy all the possible refrigeration and air conditioning applications.
On request, the models can be equipped with non-standard coils and fan motors.
applications
- Industrial AC
- Refrigeration systems
- Close control
- Precision air conditioning
- Data centers
- Industrial AC
- Refrigeration systems
- Close control
- Precision air conditioning
- Data centers
- Industrial AC
- Refrigeration systems
- Close control
- Precision air conditioning
- Data centers
capacity range
From 88 to 1934 kW
From 88 to 1934 kW
From 88 to 1934 kW
Technical Information
Coil features
- The entire range is equipped with high efficiency coils made from special “Air intake” profile aluminium fins and inner grooved copper tube suitable for new generation refrigerants.
- They are supplied charged with dry air at 2 bars and 2,1 mm fin spacing for the entire range.
- The entire range is equipped with high efficiency coils made from special “Air intake” profile aluminium fins and inner grooved copper tube suitable for new generation refrigerants.
- They are supplied charged with dry air at 2 bars and 2,1 mm fin spacing for the entire range.
- The entire range is equipped with high efficiency coils made from special “Air intake” profile aluminium fins and inner grooved copper tube suitable for new generation refrigerants.
- They are supplied charged with dry air at 2 bars and 2,1 mm fin spacing for the entire range.
Casing
- Made of a pre-painted galvanised metal sheet, with a smooth finish covered by a plastic protection film.
Fan motors
The standard AC fan motors employed have the following features:
Ø 800 mm
- fan motor module: from 4 to 18
- external rotor
- 400V/3/50 Hz three-phase
- dual speed
- poles: 6, 8 strengthen, 8; 12, 12 slowed, 12 ultra-slowed
- die cast aluminium sickle blades or aluminium/techno polymer hybrid version with optimized sickle blades
- epoxy coated steel fan guard
Ø 910 mm
- fan motor module: from 4 to 18
- external rotor
- 400V/3/50 Hz three-phase
- dual speed
- poles: 6 strengthen, 6, 8, 12
- die cast aluminium sickle blades or aluminium/techno polymer hybrid version with optimized sickle blades
- epoxy coated steel fan guard
The optional high efficiency EC fan motors have the following features:
Ø 800 mm and Ø 910 mm
- speed control with 0-10V signal
- additional speed regulator with MODBUS system
The standard AC fan motors employed have the following features:
Ø 800 mm
- fan motor module: from 4 to 18
- external rotor
- 400V/3/50 Hz three-phase
- dual speed
- poles: 6, 8 strengthen, 8; 12, 12 slowed, 12 ultra-slowed
- die cast aluminium sickle blades or aluminium/techno polymer hybrid version with optimized sickle blades
- epoxy coated steel fan guard
Ø 910 mm
- fan motor module: from 4 to 18
- external rotor
- 400V/3/50 Hz three-phase
- dual speed
- poles: 6 strengthen, 6, 8, 12
- die cast aluminium sickle blades or aluminium/techno polymer hybrid version with optimized sickle blades
- epoxy coated steel fan guard
The optional high efficiency EC fan motors have the following features:
Ø 800 mm and Ø 910 mm
- speed control with 0-10V signal
- additional speed regulator with MODBUS system
The standard AC fan motors employed have the following features:
Ø 800 mm
- fan motor module: from 4 to 18
- external rotor
- 400V/3/50 Hz three-phase
- dual speed
- poles: 6, 8 strengthen, 8; 12, 12 slowed, 12 ultra-slowed
- die cast aluminium sickle blades or aluminium/techno polymer hybrid version with optimized sickle blades
- epoxy coated steel fan guard
Ø 910 mm
- fan motor module: from 4 to 18
- external rotor
- 400V/3/50 Hz three-phase
- dual speed
- poles: 6 strengthen, 6, 8, 12
- die cast aluminium sickle blades or aluminium/techno polymer hybrid version with optimized sickle blades
- epoxy coated steel fan guard
The optional high efficiency EC fan motors have the following features:
Ø 800 mm and Ø 910 mm
- speed control with 0-10V signal
- additional speed regulator with MODBUS system
Wiring
- The fan motors and the casework are predisposed for grounding.
Certifications
- CE
- PED
Published data
- EN 327 reference standard.
- (EMEA) The stated capacity is assessed based on ambient temperature 25 °C and condensing temperature 40 °C with R448A (mid-point).
- (APAC) The stated capacity is assessed based on ambient temperature 25 °C and condensing temperature 40 °C with R404A.
- EN 327 reference standard.
- The stated capacity is assessed based on ambient temperature 25 °C and condensing temperature 40 °C with R448A (mid-point).
- EN 327 reference standard.
- (APAC) The stated capacity is assessed based on ambient temperature 25 °C and condensing temperature 40 °C with R404A.
Downloads
Scelte Selection Software
SCELTE is a web based application to select all ECO™ branded coolers and to configure bespoke models.
The selection engine is faster than ever and will allow you to select the unit that suit your requirements, also thanks to a comprehensive database with all new generation refrigerants available on the market.
