This product is not available in region
overview
Range consists of 48 customizable models.
In accordance to the room temperature, the range is divided as follows:
- IDN 4 for higher temperatures (≥ +2 °C) with 4 mm fin spacing;
- IDN 7 for medium, lower temperatures (≥ –25 °C) with 7 mm fin spacing, a defrost system version is recommended;
- IDN 10 for lower temperatures (≥–35 °C) with 10 mm fin spacing, a defrost system version is recommended;
- IDN 12 for lower temperatures (≥ –40 °C) with 12 mm fin spacing, a defrost system version is recommended.
On request, the models can be equipped with non-standard: coils, defrosting, and fan motors.
Range consists of 48 customizable models.
In accordance to the room temperature, the range is divided as follows:
- IDN 4 for higher temperatures (≥ +2 °C) with 4 mm fin spacing;
- IDN 7 for medium, lower temperatures (≥ –25 °C) with 7 mm fin spacing, a defrost system version is recommended;
- IDN 10 for lower temperatures (≥–35 °C) with 10 mm fin spacing, a defrost system version is recommended;
- IDN 12 for lower temperatures (≥ –40 °C) with 12 mm fin spacing, a defrost system version is recommended.
On request, the models can be equipped with non-standard: coils, defrosting, and fan motors.
applications
- Low ceiling industrial refrigeration cold rooms
- Refrigerated warehouses.
- Low ceiling industrial refrigeration cold rooms
- Refrigerated warehouses.
capacity range
Please contact us
Please contact us
Technical Information
Coil features
- The entire range is equipped with high efficiency coils made from special profile aluminum fins and smooth AISI304 stainless tube.
- The entire range is equipped with high efficiency coils made from special profile aluminum fins and smooth AISI304 stainless tube.
Casing
- Made of a magnesium aluminum alloy, with a smooth finish covered by a plastic protection film.
Fan motors
The standard AC fan motors employed have the following features:
Ø 450 mm
- fan motor module: from 1 to 3
- external rotor
- three-phase 400V/3/50 Hz
- dual velocity
- epoxy coated steel fan guard
Ø 560 mm
- fan motor module: from 2 to 4
- external rotor
- three-phase 400V/3/50 Hz
- dual velocity
- epoxy coated steel fan guard
The optional high efficiency EC fan motors have the following features:
Ø 450 mm
- fan motor module: from 1 to 3
- external rotor
- three-phase 400V/3/50 Hz
- epoxy coated steel fan guard
Ø 560 mm
- fan motor module: from 2 to 4
- external rotor
- three-phase 400V/3/50 Hz
- epoxy coated steel fan guard
The standard AC fan motors employed have the following features:
Ø 450 mm
- fan motor module: from 1 to 3
- external rotor
- three-phase 400V/3/50 Hz
- dual velocity
- epoxy coated steel fan guard
Ø 560 mm
- fan motor module: from 2 to 4
- external rotor
- three-phase 400V/3/50 Hz
- dual velocity
- epoxy coated steel fan guard
The optional high efficiency EC fan motors have the following features:
Ø 450 mm
- fan motor module: from 1 to 3
- external rotor
- three-phase 400V/3/50 Hz
- epoxy coated steel fan guard
Ø 560 mm
- fan motor module: from 2 to 4
- external rotor
- three-phase 400V/3/50 Hz
- epoxy coated steel fan guard
Defrost
Wiring
- The electric parts and casework are predisposed for grounding.
- The wiring of the heaters is carried out in separate IP 54 protection grade junction boxes.
Published data
- Please contact us
- Please contact us
Downloads
APAC
Scelte Selection Software
SCELTE is a web based application to select all ECO™ branded coolers and to configure bespoke models.
The selection engine is faster than ever and will allow you to select the unit that suit your requirements, also thanks to a comprehensive database with all new generation refrigerants available on the market.
