This product is not available in region
overview
Range consists of 240 customizable models.
In accordance to the room temperature, the range is divided as follows:
- ICN 4 for higher temperatures (≥+2 °C) with 4 mm fin spacing;
- ICN 7 for middle, lower temperatures (≥–25 °C) with 7 mm fin spacing, a defrost system version is recommended;
- ICN 10 for lower temperatures (≥–35 °C) with 10 mm fin spacing, a defrost system version is recommended;
- ICN 12 for lower temp. (≥–40 °C) with 12 mm fin spacing, a defrost system version is recommended.
On request, the models can be equipped with non-standard coils, defrosting, and fan motors.
Range consists of 240 customizable models.
In accordance to the room temperature, the range is divided as follows:
- ICN 4 for higher temperatures (≥+2 °C) with 4 mm fin spacing;
- ICN 7 for middle, lower temperatures (≥–25 °C) with 7 mm fin spacing, a defrost system version is recommended;
- ICN 10 for lower temperatures (≥–35 °C) with 10 mm fin spacing, a defrost system version is recommended;
- ICN 12 for lower temp. (≥–40 °C) with 12 mm fin spacing, a defrost system version is recommended.
On request, the models can be equipped with non-standard coils, defrosting, and fan motors.
applications
- Large refrigeration cold rooms
- Refrigerated warehouses
- Large refrigeration cold rooms
- Refrigerated warehouses
capacity range
Please contact us
Please contact us
Technical Information
Coil features
- The entire range is equipped with high efficiency coils made from special profile aluminum fins and smooth AISI304 stainless tube.
- The entire range is equipped with high efficiency coils made from special profile aluminum fins and smooth AISI304 stainless tube.
Casing
- Made of a magnesium aluminum alloy, with a smooth finish covered by a plastic protection film.
Fan motors
The standard fan motors employed have the following features:
500, 560, 630, 710 and 910 mm
- external rotor
- three-phase 400V/3/50Hz
- dual speed
- epoxy coated steel fan guard
- IP 54 protection grade
- THCL155 (class F) insulation
- Internal thermal contact protection
- maximum operating temperature: +40 °C
The optional high efficiency EC fan motors have the following features:
- IP 54 protection grade.
- Class B insulation.
- built-in electronic protection.
- minimum operating temperature –25 °C
The standard fan motors employed have the following features:
500, 560, 630, 710 and 910 mm
- external rotor
- three-phase 400V/3/50Hz
- dual speed
- epoxy coated steel fan guard
- IP 54 protection grade
- THCL155 (class F) insulation
- Internal thermal contact protection
- maximum operating temperature: +40 °C
The optional high efficiency EC fan motors have the following features:
- IP 54 protection grade.
- Class B insulation.
- built-in electronic protection.
- minimum operating temperature –25 °C
Defrost
Wiring
- The electric parts and casework are predisposed for grounding.
- The wiring of the heaters is carried out in separate IP 54 protection grade junction boxes.
Published data
- Please contact us
- Please contact us
Downloads
APAC
Scelte Selection Software
SCELTE is a web based application to select all ECO™ branded coolers and to configure bespoke models.
The selection engine is faster than ever and will allow you to select the unit that suit your requirements, also thanks to a comprehensive database with all new generation refrigerants available on the market.
