This product is not available in region
overview
Range consists of 8 customizable models.
According to the room temperature, the range is divided as follows:
- STE H3 for higher temperatures (≥ +2 °C) with 3,5 mm fin spacing;
- STE L7 for lower temperatures (≥ –25 °C) with 7 mm fin spacing, electric defrost version (ED) is recommended.
On request, the models can be equipped with non-standard coils, defrosting, and fan motors.
Range consists of 8 customizable models.
According to the room temperature, the range is divided as follows:
- STE H3 for higher temperatures (≥ +2 °C) with 3,5 mm fin spacing;
- STE L7 for lower temperatures (≥ –25 °C) with 7 mm fin spacing, electric defrost version (ED) is recommended.
On request, the models can be equipped with non-standard coils, defrosting, and fan motors.
applications
- Small cold rooms
- Walk-in cabinets
- Low ceiling commercial refrigeration cold rooms
- Small cold rooms
- Walk-in cabinets
- Low ceiling commercial refrigeration cold rooms
capacity range
Please contact us
Please contact us
Technical Information
Coil features
- The entire range is equipped with high efficiency coils made from special profile aluminium fins and inner grooved copper tube, suitable for new generation refrigerants.
- The entire range is equipped with high efficiency coils made from special profile aluminium fins and inner grooved copper tube, suitable for new generation refrigerants.
Casing
- Made of a magnesium aluminum alloy, with a smooth finish covered by a plastic protection film.
Fan motors
The standard AC fan motors employed have the following features:
Ø 315 mm
- fan motor module: from 1 to 4
- external rotor
- single phase 230V/1/50-60 Hz
- built-in electric capacitor
- epoxy coated steel fan guard
The optional high efficiency EC fan motors have the following features:
Ø 300 mm
- fan motor module: the same as AC fan motors
- external rotor
- single phase 230V/1/50-60 Hz
- epoxy coated steel fan guard
The standard AC fan motors employed have the following features:
Ø 315 mm
- fan motor module: from 1 to 4
- external rotor
- single phase 230V/1/50-60 Hz
- built-in electric capacitor
- epoxy coated steel fan guard
The optional high efficiency EC fan motors have the following features:
Ø 300 mm
- fan motor module: the same as AC fan motors
- external rotor
- single phase 230V/1/50-60 Hz
- epoxy coated steel fan guard
Defrost
Wiring
- The electric parts and casework are connected to an earth terminal.
- The wiring of the fan motors and heaters is carried out in separate IP 54 protection grade junction boxes.
Downloads
APAC
Scelte Selection Software
SCELTE is a web based application to select all ECO™ branded coolers and to configure bespoke models.
The selection engine is faster than ever and will allow you to select the unit that suit your requirements, also thanks to a comprehensive database with all new generation refrigerants available on the market.
